Silica gel products industry inevitably has some silica gel products manufacturers in order to reduce production costs, so as to use some methods that we do not agree with. The following liquid silica gel, liquid silica gel products, liquid silica gel manufacturers for you to reveal some silica gel products manufacturers to reduce costs and do some methods.

金彩汇One: add calcium carbonate on the basis of the original formula.

金彩汇This method is also the "open secret" in the silicone rubber industry. The feasibility of this method lies in that the silicone rubber formula does not contain calcium carbonate on the premise of adding 30 pieces of calcium carbonate mixed rubber performance almost unchanged, so it can be feasible.

金彩汇Two: on the basis of the original formula, add recycled glue.

This method is due to the role of recycled rubber between rubber and filler, adding 30 to 50 pieces of recycled rubber mixing performance changes little.

金彩汇Three: change the expensive plasticizer in original match square into cheaper plasticizer

金彩汇This method passes manufacturer of a few silica gel products to test, think expensive plasticizer with good quality and cheap plasticizer effect is same, put much put little result is same. But there must be a difference.

Four: reduce the grade of silicone rubber raw materials.

金彩汇Such as: the quality of high grade can pass LFGB, FDA food level testing of raw materials into raw materials mixed with powder.

金彩汇Five: large scale compression of rubber refining time.

For example: originally 20 minutes, try to change it into 10 minutes so as to shorten the production time cost. The reason for doing so may be that the formula of silicone rubber plays a decisive role, and the technology is relatively secondary.

In fact, it is about the same, but each link is not to be underestimated, as the saying goes: "a difference is as good as a difference" above views for reference only